L574 wheel loader

The model called L574 is based on the actual model of the brand Liebherr called with the same name. A model that was launched in 1998 and stopped being manufactured in 2005.

The model is completly designed and built by MAGOM HRC.

The machine is completely built in metal except for the cabin interior (steering wheel and seat). The wheels consist of solid brass rims and solid rubber tires. Choose between the standard bucket or the combined one, both made of aluminum. Realistic pins are included at all anchor points of hydraulic cylinders.

The ratio of materials used is approximately: Aluminum 80%, Brass 11%, Steel 1%, Plastic 3%, Rubber 5%.

The model is sold as you see in the pictures.

SPECS:

• Scale: 1/16
• Weight: 8kg (ready to run).
• Transmission: 4x4, shaft-driven with rigid axles. It is made by a Mabuchi engine, a gearbox with steel pinions, aluminum brass and rigid axles.
• Gearing: 1-speed, 4-cascade steel pinion. Ratio 1:112.
• Axle: Made in aluminum with ALU-BRASS conical gears.
• Includes the cabin interior made with a 3D printer.
• Dimensions:

HYDRAULICS (unassembled):

STANDARD BUCKET:

• M3 hydraulic system for 3 mm hose.
• Brushless Hydraulic Pump M3 3 mm hose. 20 bar. 40 mm integrated tank. Integrated motor.
• 2 x Silent block for the pump.
• 2 x M4x8 button head screw
• Special 3-way valve with M3 front outlet for 3 mm hose. Lateral 90º.
• 2 x Y Connector 120º M3 for 3 mm hose.
• 5 x Hydraulic cylinders: Main arm (2 x 15 mm cylinders 3 mm hose), steering (2 x 15 mm cylinders 3 mm hose) and bucket (1 x 18 mm cylinder 3 mm hose). Includes 2 x U-shaft end, 2 x M3x6 button head screw, 4 x M3 Lock Nuts, Realistic Pins.
• 3 meters of 3 / 1.8 mm tubing.
• 32 locking sleeves for 3 mm pipe.
• 1 spring.
• 250 ml of MAGOM hydraulic oil.

COMBINED BUCKET:

• M3 hydraulic system for 3mm and 2mm hose.
• Brushless hydraulic pump M3 3 mm hose. 20 bar. 40 mm integrated tank. Integrated motor.
• 2 x Silent block for the pump.
• 2 x M4x8 button head screw
• Special 4-way valve with M3 front outlet, 3-way for 3mm hose and one way for 2mm pipe. Lateral 90º.
• 2 x Y connector 120º M3 for 3 mm hose.
• 2 x M3 T-connector special for combined bucket.
• 7 x Hydraulic Cylinders: Main arm (2 x 15 mm cylinders 3 mm hose), steering (2 x 15 mm cylinders 3 mm hose), bucket (1 x 18 mm cylinder 3 mm hose) and combined bucket(2 x 10mm cylinder 2mm hose). Includes 2 x U-shaft end, 2 x M3x6 button head screw, 4 x M3 Lock Nuts, Realistic Pins.
• 3 meters of 3 / 1.8 mm hose.
• 2 meters of 2/1 mm hose.
• 32 locking sleeves for 3 mm hose.
• 10 locking sleeves for 2 mm hose.
• 1 spring.
• 250 ml of oil.

ELECTRONICS (unassembled):

STANDARD BUCKET:

• Operating voltage: 11.1V.
• Integrated 12V 7300rpm motor for transmission.
• 1 x 30A brushless ESC for pump motor.
• 1000 kv brushless motor for the pump.
• 1 x BS18 brushed ESC for drive motor.
• PCB for excavator wiring.
• 3 x Micro servo 9g
• Pair of XT60 connectors for battery.

COMBINED BUCKET:

• Operating voltage: 11.1V.
• Integrated 12V 7300rpm motor for transmission.
• 1 x 30A brushless ESC for pump motor.
• 1000 kv brushless motor for the pump.
• 1 x BS18 brushed ESC for drive motor.
• PCB for excavator wiring.
• 4 x Micro servo 9g
• Pair of XT60 connectors for battery.

Equipment NOT included:

• Painting.
• Hydraulics and electronics mounting.